10117669 | GBA2W - фото 1 - id-p104659245

Характеристики и описание

electrical ratings
Voltage supply	10...30 VDC
Reverse polarity protection	Yes
Consumption w/o load	≤50 mA (24 VDC)
Initializing time typ.	20 ms after power on
Interface	20 ms after power onSSI Incremental A 90° B (optional)
Function	Singleturn
Steps per revolution	≤524288 / 19 bit
Absolute accuracy	±0,01 °
Sensing method	Optical
Code	Gray or binary
Code sequence	CW/CCW coded by connection
Inputs	CW/CCW coded by connectionSSI clock Control signals UP/DOWN inv. and zero
Output stages	CW/CCW coded by connectionSSI clock Control signals UP/DOWN inv. and zeroSSI data: linedriver RS485 Diagnostic outputs push-pull
Incremental output	2048 pulses A90°B + inverted
Interference immunity	DIN EN 61000-6-2
Emitted interference	DIN EN 61000-6-4
Diagnostic function	Self-diagnosis
Approval	UL approval / E63076
mechanical design
Size (flange)	ø58 mm
Shaft type	ø58 mmø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange)
Flange	Clamping or synchro flange
Protection DIN EN 60529	Clamping or synchro flangeIP 54 (without shaft seal) IP 65 (with shaft seal)
Operating speed	Clamping or synchro flangeIP 54 (without shaft seal) IP 65 (with shaft seal)≤10000 rpm (mechanical) ≤6000 rpm (electric)
Starting torque	Clamping or synchro flangeIP 54 (without shaft seal) IP 65 (with shaft seal)≤10000 rpm (mechanical) ≤6000 rpm (electric)≤0,015 Nm (+25 °C, IP 54) ≤0,03 Nm (+25 °C, IP 65)
Rotor moment of inertia	20 gcm²
Admitted shaft load	20 gcm²≤20 N axial ≤40 N radial
Material	20 gcm²≤20 N axial ≤40 N radialHousing: aluminium Flange: aluminium
Operating temperature	20 gcm²≤20 N axial ≤40 N radialHousing: aluminium Flange: aluminium-25...+85 °C -40...+85 °C (optional)
Relative humidity	95 % non-condensing
Resistance	95 % non-condensingDIN EN 60068-2-6 Vibration ±0.75 mm - 10-58 Hz 10 g - 58-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms
Weight approx.	400 g
Connection	400 gConnector M23, 12-pin Cable 1 m